APRS Packet Errors for W6BXN-3 (last 24 hours)

This table contains packets in which findU has detected an error. This is an automated system, no manual checking of these packets has been done. Most common cause of this is mistakes in entering the latitude/longitude into hard-coded digis, or positions of 0/0. If packets of yours appear here, and you have looked at it carefully and cannot find the error, look again. I've been watching these error messages in my log, and believe my parser is reasonably correct. Go get the APRS spec to be sure. If you have done that, and are CERTAIN the packet is a legal APRS packet, then it is possible that there is an error in my my parser. Only email me if you are absolutely, positively certain...ask yourself, would I bet $100!

time (UTC)Packet
20261023234701W6BXN-3>BEACON,qAR,KO6KL-10:;147.030+x3732.15N/12003.80Wr147.030MHz T100 + R60m Bullion W6BXN
20261024014702W6BXN-3>BEACON,qAO,KO6KL-1:;147.030+x3732.15N/12003.80Wr147.030MHz T100 + R60m Bullion W6BXN
20261024054701W6BXN-3>BEACON,qAO,KO6KL-1:;147.030+x3732.15N/12003.80Wr147.030MHz T100 + R60m Bullion W6BXN
20261024074702W6BXN-3>BEACON,qAO,KO6KL-1:;147.030+x3732.15N/12003.80Wr147.030MHz T100 + R60m Bullion W6BXN
20261024094702W6BXN-3>BEACON,qAO,KN6PTO-2:;147.030+x3732.15N/12003.80Wr147.030MHz T100 + R60m Bullion W6BXN
20261024114702W6BXN-3>BEACON,qAO,KN6PTO-2:;147.030+x3732.15N/12003.80Wr147.030MHz T100 + R60m Bullion W6BXN
20261024134703W6BXN-3>BEACON,qAO,KN6PTO-2:;147.030+x3732.15N/12003.80Wr147.030MHz T100 + R60m Bullion W6BXN
20261024154702W6BXN-3>BEACON,qAO,KN6PTO-2:;147.030+x3732.15N/12003.80Wr147.030MHz T100 + R60m Bullion W6BXN
20261024174702W6BXN-3>BEACON,qAO,KN6PTO-2:;147.030+x3732.15N/12003.80Wr147.030MHz T100 + R60m Bullion W6BXN
20261024194703W6BXN-3>BEACON,qAO,KO6KL-1:;147.030+x3732.15N/12003.80Wr147.030MHz T100 + R60m Bullion W6BXN
20261024214703W6BXN-3>BEACON,qAO,KO6KL-1:;147.030+x3732.15N/12003.80Wr147.030MHz T100 + R60m Bullion W6BXN